Pianos consistently make movers annual list of items that are most frequently damaged. Grand pianos are especially problematic. Practicing the following treatments for taking apart, padding and filling grand pianos will avoid damage, lower claims cost, and improve customer fulfillment.
1) A minimum of three people are required to manage a child grand piano. If the baby grand piano needs to increase or down stairs or if a complete or performance grand piano needs to be transported, a minimum of four people are required.
2) Constantly complete a precise and comprehensive stock. It might be required or more effective to utilize a visual inventory to properly describe and reveal pre-existing damage.
3) As numerous parts are disassembled, please location all hardware in an appropriately labeled parts bag and after that put the parts bag in a "Components Box".
4) Remove the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a clean furnishings pad.
5) Disconnect the cover by eliminating the hinge pins. Have one person wiggle the lid, holding it opposite the hinge, while a 2nd individual works the pin loose. Please take care not to harm the wood with the pliers or with the pin itself. Cover the jaws of the pliers with a little fabric to assist avoid damage to the wood if necessary. Wrap the lid in a clean furniture pad.
6) Eliminate the prop that holds the cover open and cover it in a clean furniture pad. The prop has a hinge pin and is in two pieces.
7) Remove the pedal assembly and wrap it in a tidy furnishings pad. The braces at the back of the assembly rest in slots at each end. When getting rid of the screws, please take care not to drop the braces. In addition, please be specifically careful with the push-rods so that they will not get bent. As you face the piano, number the push-rods from left to right as "1", "2", and "3", by placing a piece of masking tape with the appropriate number on each rod. Keep in mind: If masking tape is unavailable, please usage properly identified parts bags for this purpose. When reassembling at destination, please be sure to put the rods in the correct order so that the pedals will work properly.
8) Pad the piano by placing a clean rolled furnishings pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to prevent it from flopping open while you manage the piano. Note: Please make sure that the surface of the piano is dust-free before padding it.
9) Position a piano board and connect the straps so that it is all set to receive the my response piano. The raised brace on the piano board ought to be at the keyboard end of the piano.
10) Eliminate the left front leg by positioning one person below the piano at the left end of the keyboard. Be sure to have 2 people raising the corner of the piano while the 3rd individual eliminates the leg. Note: Please be sure to keep in mind which legs were gotten rid of from which positions given that some pianos have legs that are not interchangeable.
11) Location the piano on the piano board by reducing the "leg-less" end onto the board. Please be sure to raise the entire piano slightly while finishing this maneuver to prevent excessive pressure on the remaining, attached legs as the piano pointers. Lift the piano to an upright position on the board. Keep in mind: Please guarantee that the soundboard is secure before lifting. Make certain that the piano is centered comfortably against the brace at the end of the piano board. Keep in mind: Never ever leave the piano ignored. Always have at least a single person holding the piano consistent at all times.
12) Remove the two remaining legs and cover them in tidy furnishings pads. These legs are kept in place by a "crucial and slot" plan. To get rid of the leg, slide it inward toward the center of the piano until it comes out of the slot.
13) Secure the piano to the this content piano board by bringing the ends of the straps together and securing them. Location folded burlap pads over the furnishings pads however under the straps to supply extra defense to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, connect the loose ends of the 2 straps together.
14) To move the piano over a flat, level surface area, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, utilize the piano board as a skid. After adequately his comment is here padding the stairs for security against residence damage, place the keyboard end of the piano toward the bottom of the stairs. Connect a bulge strap to the leading end of the piano board to avoid the piano from slipping.
16) To load the piano, leave it on the piano board and location it in a tier as the very first base item with the keyboard facing the wall of the preceding tier. The very best location to fill the cushioned lid is between the piano and the preceding tier or in between the wall and the piano.
Although grand pianos represent a substantial obstacle, they can be moved without damage by utilizing good sense and practicing the treatments noted above.